Wuxi Zhongxin Special Steel Co.，Ltd
High Quality. High Performance. Competitive Price.
Add to Cart
Brushed BA 304 Stainless Steel Strip Coil | 304 Slit Coil | UNS 30400 Coil | AISI 304L Stainless Strip overview
304L grade stainless steel has many of the same mechanical properties of 304 stainless steel; however ,this grade is an extra low-carbon variation. It has .03% maximum carbon content which helps to remove the carbide precipitation that occurs during the welding process. Because of these characteristics, the 304L stainless steel alloy can be used in the “as welded” condition, even in highly corrosive conditions. Other than this slight variation in its composition 304L stainless steel is used is many of the same applications as 304, and tends to be as commonly found.
Inventory
Form : Strip coil , coil , foil ,wire , plate ,sheet , pipe ,tube ,square.
304L Stainless Steel, 304 Stainless
| Material | Finish | Grade | Thickness(mm) | Width(mm) | ||
| | 2B | 304/304L | 0.3-4.0mm | 10mm-3000mm | ||
| 316-316L | 10mm-3000mm | |||||
| 430/409L/439/410S | 10mm-3000mm | |||||
| 201/202 | 10mm-3000mm | |||||
| BA | 304/304L | 0.3-4.0mm | 10mm-3000mm | |||
| Stainless Steel coil cold rolled | 316L | 10mm-3000mm | ||||
| 430/409L/439/410S | 10mm-3000mm | |||||
| 201/202 | 10mm-3000mm | |||||
| NO.3/NO.4 | 304/304L | 0.3-4.0mm | 10mm-3000mm | |||
| 316L | 10mm-3000mm | |||||
| 430/409L/439/410S | 10mm-3000mm | |||||
| 201/202 | 10mm-3000mm | |||||
| HL | 304/304L | 0.3-4.0mm | 10mm-3000mm | |||
| 316L | 10mm-3000mm | |||||
| 430/409L/439/410S | 10mm-3000mm | |||||
| 201/202 | 10mm-3000mm | |||||
| NO.8 | 304/304L | 0.3-3mm | 10mm-3000mm | |||
| 316L | 10mm-3000mm | |||||
| 430 | 10mm-3000mm | |||||
| Packing | 1.with paper interleaves 2.with PVC,PE,Laser foil coated on main side 3.Seaworthy export packing with fumigated wooden pallets or steel pallets | | ||||
| Surface finish | Characteristics and application |
| NO.2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy compreh ensive uses. |
| NO.1 | The surface is finished by heat treatment and pickling or processes corresponding thereto after hot rolling. |
| NO.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria,but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL | Polished with abrasive belt of grit #150#320 on the NO.4 finish and has continuous streaks,mainly used as buildingsornaments elevators,door of building,frontal plate etc. |
| BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror,kitchen apparatus,ornament etc. |
| 8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
ANNEALED CONDITION
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 38 KSI min (260 MPA min) Elongation: 40%min Hardness: B95 max
TEMPERED 1/16 HARD
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 45 KSI min (310 MPA min) Elongation: 40% min
Tempered 1/8 Hard Ultimate Tensile Strength: 100 KSI min (690 MPA min) Yield Strength (0.2% Offset): 55 KSI min (380 MPA min) Elongation: 45% min
TEMPERED 1/4 HARD
Ultimate Tensile Strength: 125 KSI min (860 MPA min) Yield Strength (0.2% Offset): 75 KSI min (515 MPA min) Elongation: 25% min
TEMPERED 1/2 HARD
Ultimate Tensile Strength: 150 KSI min (1035 MPA min) Yield Strength (0.2% Offset): 110 KSI min (760 MPA min) Elongation: 15% < 0.15" 18% > 0.15"
TEMPERED 3/4 HARD
Ultimate Tensile Strength: 175 KSI min (1205 MPA min) Yield Strength (0.2% Offset): 135 KSI min (930 MPA min) Elongation: 10% < 0.15" 12% > 0.15"
TEMPERED FULL HARD
Ultimate Tensile Strength: 185 KSI min (1275 MPA min) Yield Strength (0.2% Offset): 140 KSI min (965 MPA min) Elongation: 8% < 0.15" 9% > 0.15"
Available Steel Grade:
Stainless steel : Type 201, 202, 205, 301, 302, 302B, 303, 303Se, 304, 304L, 302HQ, 304N, 305, 308, 309, 309S, 310, 310S, 314, 316, 316L, 316F, 316N, 317, 317L, 317LMN, 321, 330, 347, 348, 384, 405, 409, 429, 430, 430F, 430FSe, 434, 436, 442, 446, 403, 410, 414, 416, 416Se, 420, 420F, 422, 431, 440A, 440B, 440C, 630 , 13-8 PH ,15-5 PH , 17-7 PH ,17-4 ph , 904L , A286 ,VG-10 , SAE 316 , SAE 316L , SAE 440 , SAE 420
Duplex stainless steel : 2205 , 2304 , 2507
Nickel alloy :
Titanium and titanium alloys
Type 304, ASTMA-666, is similar to Type 302, but has a maximum carbon content of .08%. This material has an excellent combination of corrosion resistance and fabricability. Gibbs stocks Type 304 stainless in gauges from .005” to .062”.
| Chemical Composition (AMS 5513) | % | Thickness Tolerances < 6” (AMS 2242) | Tolerance (inch) +/- | |||||
| Carbon | 0.08 max | over .050 - .062 incl | +/- .0030 | |||||
| Manganese | 2.00 max | over .035 - .050 incl | +/- .0025 | |||||
| Silicon | 1.00 max | over .029 - .035 incl | +/- .0020 | |||||
| Phosphorus | .040 max | over .020 - .029 incl | +/- .0020 | |||||
| Sulfur | .030 max | over .017 - .020 incl | +/- .0015 | |||||
| Chromium | 18.00 -20.0 | over .013 - .017 incl | +/- .0015 | |||||
| Nickel | 8.0 – 10.5 | over .011 - .013 incl | +/- .0015 | |||||
| Molybdenum | 0.75 max | over .010 - .011 incl | +/- .0015 | |||||
| Copper | 0.75 max | under .010 | +/- 10% | |||||
|
Mechanical Properties (AMS 5513) | ||||||||
| Condition | AMS Specification | Tensile Min PSI | Yield Min PSI | Elong % Min | Hardness | |||
| Annealed | 5513 | 75,000 | 30,000 | 40 | RB 92 max | |||
| ¼ Hard | 5910 | 125,000 | 75,000 | 10 / 12* | RC 25 min | |||
| ½ Hard | 5911 | 150,000 | 110,000 | 6 / 7** | RC 32 min | |||
| ¾ Hard | 5912 | 175,000 | 135,000 | 3 / 5** | RC 37 min | |||
| Spring | 5913 | 185,000 | 140,000 | 3 / 5** | RC 41 min | |||
| *Over .030 thickness ** Over .015 thickness | ||||||||
| Additional Information | ||
| Width Tolerance | +/- .003 | |
| Camber Tolerance | Up to and including 1.500” wide | .500” in 8 feet |
| Over 1.500” wide | .250” in 8 feet | |
| Edges available | #3 Slit edge | Mill edge |
| #5 Deburred edge | ||
| #1 Round edge | ||
PACKING
DIN 1.4306 DIN X2CrNi19-11 DIN 19Cr11Ni AFNOR Z3CN18-10 BS 304S11 SS 2352 SAE 304L JIS SUS304L JIS SCS19 JIS SCS19A JIS SUS304LTB JIS SUS304LTP JIS SUS304LTPY JIS SUS304LTBS JIS SUSF304L EN X2CrNi19-11 EN 1.4306 ISO A3 GB 00Cr19Ni10 ASTM Grade CPF3 UNS S30403 DIN 1.4307 DIN G-X2CrNiN18-9 AFNOR Z3CN19-09 EN X2CrNi18-9 EN 1.4307 GOST 03Ch18N11 ASTM TP304L IS X02Cr18Ni11 DIN 1.4309 BS 304C12 JIS SCS13 EN GX2CrNi19-11 EN 1.4309 ASTM CF3 UNS J92500 ASTM 304L ASTM S30403 ASTM F304L ASTM MT304L
Q: Would you provide samples For free?
A: Yes. with on stock specification We provide samples For Free. Freight charge collect
Q: What information should i provide to source for the right products?
A: Material grade, width, thickness, coating and Purchase quantity, Expected lead time, etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed. We provide All Original Mill test certificate and support third party inspection.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.