Wuxi Zhongxin Special Steel Co.，Ltd
High Quality. High Performance. Competitive Price.
Add to Cart
Brushed BA 304 Stainless Steel Strip Coil | 304 Slit Coil | UNS 30400 Coil | AISI 304L Stainless Strip Slit Strip Coil overview
If you are looking for a grade of austenitic stainless steel that would be optimal for machining, 303 Stainless Steel has the compositional properties that make it the ideal candidate. This steel is especially optimum for extensive machining practices because of the increased level of sulfur present in its composition. Note though the sulfur does lower the corrosion resistance, as well as weldability and formability of 303 compared to say the toughness found in 304 Stainless Steel.
Carbon .10%, Manganese 2.00%, Phosphorus .45%, Sulfur .15%, Silicon 1.00%, Chromium 17-19.00%, Nickel 8.00-10.00%, Iron Balanced
Inventory
Form : Strip coil , coil , foil ,wire , plate ,sheet , pipe ,tube ,square.
Common Trade Names
303 Stainless, 303 Stainless
304 Stainless Steel Strip Coil | 304 Slit Coil | UNS 30400 Coil | AISI 304L Specification and Dimension Ranges
| Material | Finish | Grade | Thickness(mm) | Width(mm) | ||
| | 2B | 304/304L | 0.3-4.0mm | 10mm-3000mm | ||
| 316-316L | 10mm-3000mm | |||||
| 430/409L/439/410S | 10mm-3000mm | |||||
| 201/202 | 10mm-3000mm | |||||
| BA | 304/304L | 0.3-4.0mm | 10mm-3000mm | |||
| Stainless Steel coil cold rolled | 316L | 10mm-3000mm | ||||
| 430/409L/439/410S | 10mm-3000mm | |||||
| 201/202 | 10mm-3000mm | |||||
| NO.3/NO.4 | 304/304L | 0.3-4.0mm | 10mm-3000mm | |||
| 316L | 10mm-3000mm | |||||
| 430/409L/439/410S | 10mm-3000mm | |||||
| 201/202 | 10mm-3000mm | |||||
| HL | 304/304L | 0.3-4.0mm | 10mm-3000mm | |||
| 316L | 10mm-3000mm | |||||
| 430/409L/439/410S | 10mm-3000mm | |||||
| 201/202 | 10mm-3000mm | |||||
| NO.8 | 304/304L | 0.3-3mm | 10mm-3000mm | |||
| 316L | 10mm-3000mm | |||||
| 430 | 10mm-3000mm | |||||
| Packing | 1.with paper interleaves 2.with PVC,PE,Laser foil coated on main side 3.Seaworthy export packing with fumigated wooden pallets or steel pallets | | ||||
| Surface finish | Characteristics and application |
| NO.2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy compreh ensive uses. |
| NO.1 | The surface is finished by heat treatment and pickling or processes corresponding thereto after hot rolling. |
| NO.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria,but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL | Polished with abrasive belt of grit #150#320 on the NO.4 finish and has continuous streaks,mainly used as buildingsornaments elevators,door of building,frontal plate etc. |
| BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror,kitchen apparatus,ornament etc. |
| 8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
Condition :
ANNEALED CONDITION
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 38 KSI min (260 MPA min) Elongation: 40%min Hardness: B95 max
TEMPERED 1/16 HARD
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 45 KSI min (310 MPA min) Elongation: 40% min
Tempered 1/8 Hard Ultimate Tensile Strength: 100 KSI min (690 MPA min) Yield Strength (0.2% Offset): 55 KSI min (380 MPA min) Elongation: 45% min
TEMPERED 1/4 HARD
Ultimate Tensile Strength: 125 KSI min (860 MPA min) Yield Strength (0.2% Offset): 75 KSI min (515 MPA min) Elongation: 25% min
TEMPERED 1/2 HARD
Ultimate Tensile Strength: 150 KSI min (1035 MPA min) Yield Strength (0.2% Offset): 110 KSI min (760 MPA min) Elongation: 15% < 0.15" 18% > 0.15"
TEMPERED 3/4 HARD
Ultimate Tensile Strength: 175 KSI min (1205 MPA min) Yield Strength (0.2% Offset): 135 KSI min (930 MPA min) Elongation: 10% < 0.15" 12% > 0.15"
TEMPERED FULL HARD
Ultimate Tensile Strength: 185 KSI min (1275 MPA min) Yield Strength (0.2% Offset): 140 KSI min (965 MPA min) Elongation: 8% < 0.15" 9% > 0.15"
Available Steel Grade:
Stainless steel : Type 201, 202, 205, 301, 302, 302B, 303, 303Se, 304, 304L, 302HQ, 304N, 305, 308, 309, 309S, 310, 310S, 314, 316, 316L, 316F, 316N, 317, 317L, 317LMN, 321, 330, 347, 348, 384, 405, 409, 429, 430, 430F, 430FSe, 434, 436, 442, 446, 403, 410, 414, 416, 416Se, 420, 420F, 422, 431, 440A, 440B, 440C, 630 , 13-8 PH ,15-5 PH , 17-7 PH ,17-4 ph , 904L , A286 ,VG-10 , SAE 316 , SAE 316L , SAE 440 , SAE 420
Duplex stainless steel : 2205 , 2304 , 2507
Nickel alloy :
Titanium and titanium alloys
PACKING
Q: Would you provide samples For free?
A: Yes. with on stock specification We provide samples For Free. Freight charge collect
Q: What information should i provide to source for the right products?
A: Material grade, width, thickness, coating and Purchase quantity, Expected lead time, etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed. We provide All Original Mill test certificate and support third party inspection.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.
ASTM A314 Equivalent Materials AISI 304 SAE 304 JIS SUS304 UNS S30400 DIN 1.4301 DIN X 5 CrNi 18 9 DIN X5CrNi18-10 AFNOR Z6CN18-09 AFNOR Z7CN18-09 BS 304S15 BS 304S31 UNI X5CrNi1810 SS 2332 UNE F.3551 JIS SUS304TBS JIS SUS304TPD JIS SUS304TP JIS SUS304TPY JIS SUS304TB JIS SUS304TF JIS SUS304TKA JIS SUS304TKC JIS SUSF304 EN X5CrNi18-10 EN 1.4301 ISO A2 GOST 08Ch18N10 GB 0Cr18Ni9 ASTM TP304 ASTM Grade B8 ASTM Grade B8A DIN 1.4314 AFNOR 9160/C 109 AFNOR 9160C411 AFNOR Z 12 CN 18-10 AISI 305 SAE 305 EN FE-PA 11 EN FE-PA 12 EN 1.4314 ASTM 305 ASTM MT304