Custom 455 Stainless Steel Coi | Strip UNS S45500 Ams 5860 overview
Stainless steel Custom 455 is an advanced martensitic alloy in the area of precipitation hardening stainless steels. It combines corrosion resistance, one-step age hardenability, ease of fabrication, and yield strength that is thrice the strength of standard stainless grade 304.
As a martensitic age-hardenable stainless steel. It provides high strength with good corrosion resistance to atmospheric environments. This alloy is relatively soft and formable in the annealed condition. A single-step aging treatment develops exceptionally high yield strength with good ductility and toughness.
PRODUCT FORMS:
Coil , Sheet, plate , Strip .wire ,- Profile, Round, Flat, Square
Custom 455 Stainless Steel Coi | Strip UNS S45500 Ams 5860 Specification and Dimension Ranges
Specififcation:
- MIL-S-83311
- AMS 5617 Gr 1 Bar
- AMS 5617 Gr 2 Bar
- HMS 6 1093 Rev G
- AMS 5578 Welded tube
- ASTM A693 Grade XM16
- ASTM A564 / ASME SB564
- AMS 5860 Sheet / strip / plate
Dimension Ranges:
| Width | Thickness | Inner Diameter | Steel Grade | Surface Finish |
| 610~2030 mm | 0.15~3.0 mm | 610 or 508 +0/-5 mm | 201; 254 SMO; 301; 301 AL; 301Si; 302; 303; 303 SE; 304; 304 L; 304 LV; 304 V; 3049; 305;30512; 308; 309; 309 S; 309 SCB; 310; 310 S; 316; 316 L; 316 LN; 316 Ti; 317; 317 L; 321; 330; 347; 384; 405; 409; 410; 410 S; 414;416; 416 SE; 420; 420 A; 420 HC; 420 LC; 420 MO; 430; 430Li; 434; 436; 439; 440 A; 440 C; 441; 442; 444; 446; 18 SR1;Carpenter 20,CB32; Carpenter 4552; Custom 450; 18-9LW1; 19-90L4; Greek Ascology;; AL-6XN4; 904L; Duplex 2205; Duplex 2304; Duplex 2507,Nickel alloys , Titanium and Ti alloys | 2B, 2D, BA, No.3, No.4, No.5, SB, HL |
| 610~2030 mm | 2.5mm~10 mm | 610 or 508 +0/-5 mm | | No.1 or As requied |
Coil Slitting Mill Capability :
Striping processing, commonly known as “slitting “, refers to the winding of a metal coil by unwinding, slitting, leveling, winding, and processing into a desired width. Slitting processing is a basic metal processing technology that combines high-quality equipment with skilled craftsmanship. it can be obtained with strict tolerance, perfect surface control , safe packaging as well as fine transportation.
- Max thickness: 18 mm
- Min thickness: 0.1 mm
- Max width: 2150 mm
- Min width: 8 mm
- Width tolerance: 0 – 0.1 mm
- Burr: T<1mm: ≤0.05mm; T≥1mm: ≤5%T
Custom 455 Stainless Steel Coi | Strip UNS S45500 Ams 5860 Application
Stainless steel grade Custom 455 is widely used in applications where standard austenitic grades do not perform well such as strength requirements in corrosive environments.
Medical devices and instrument, needles, pins
Custom 455 Stainless Steel Coi | Strip UNS S45500 Ams 5860 Technical datasheet
Chemical Composition
The chemical composition of stainless steel grade Custom 455 is outlined in the following table.
| Element | Content (%) |
| Chromium, Cr | 11-12.5 |
| Nickel, Ni | 7.5-9.5 |
| Copper, Cu | 1.5-2.5 |
| Titanium, Ti | 0.80-1.4 |
| Molybdenum, Mo | 0.50 max |
| Manganese, Mn | 0.50 max |
| Silicon, Si | 0.50 max |
| Columbium, Cb + Tantalum, Ta | 0.10-0.50 |
| Carbon, C | 0.05 max |
| Phosphorus, P | 0.040 max |
| Sulfur, S | 0.030 max |
| Iron, Fe | Balance |
Physical Properties
The physical properties of stainless steel grade Custom 455 are tabulated below.
| Properties | Metric | Imperial |
| Density | 7.76 g/cm3 | 0.280 lb/in3 |
Mechanical Properties
The following table shows mechanical properties of stainless steel grade Custom 455 (H1000 condition).
| Properties | Metric | Imperial |
| Tensile strength | 1413 MPa | 204900 psi |
| Yield strength | 1345 MPa | 195100 psi |
| Modulus of elasticity | 200 GPa | 29000 ksi |
| Poisson’s ratio | 0.3 | 0.3 |
| Elongation at break | 14% | 14% |
| Hardness, Brinell | 411 | 411 |
| Hardness, Knoop (estimated from Rockwell C) | 450 | 450 |
| Hardness, Vickers (estimated from Rockwell C) | 430 | 430 |
| Hardness, Rockwell C | 44 | 44
|
Custom 455 Stainless Steel Coi | Strip UNS S45500 Ams 5860 Products display and Package Details
Packaging (details)
1. Pallets with several coils
1.1 Coils packed eye to sky on one-way pallet with spacers without pallet cover.
1.2 Coils packed eye to sky on one-way pallet with spacers and covered with shrink-wrap.
1.3 Coils packed eye to sky on one-way pallet with spacers and covered with paper hood.
1.4 Coils packed eye to sky on one-way pallet with spacers and covered with wooden box.
1.5 Coils packed eye to sky on pallet with spacers without cover.
1.6 Coils packed eye to sky on pallet with spacers and shrink wrap.
1.7 Coils packed eye to sky on pallet with spacers and paper hood.
2. Pallet with single coil
2.1 Coil packed eye to sky on one-way-pallet without cover.
2.2 Coil packed eye to sky on one-way-pallet with shrink wrap.
2.3 Coil packed eye to sky on one-way-pallet with paper hood.
2.4 Coil packed eye to sky on one-way-pallet with wooden box.
2.5 Coil packed eye to sky on pallet without cover.
2.6 Coil packed eye to sky on pallet with shrink wrap.
2.7 Coil packed eye to sky on pallet with paper hood.
3. Pallets with multistrip
3.1 Multistrip on one-way pallet.
4. Coils standing, unpacked
5. Pallets with spools, standing with horizontal axe
5.1 Wooden spool on one-way pallet standing with horizontal (eye to the wall) axe.
5.2 Cardboard spool (cardboard core and cardboard sheet) on one-way pallet standing (eye to the wall).
6. Cut lengths
6.1 Bundled.
6.2 On wooden boards.
6.3 In wooden boxes.
7. Special customer requests for packaging
7.1 Weight per packing unit.
7.2 Design and size of pallet.
7.3 Number and kind of coil tying.
7.4 Number and kind of interleaving spacer strips.
7.5 Corrosion protection.
7.6 Kind of wood and wood protection used.
7.7 Marking of material and packing.
General Q and A Questions
Q: Would you provide samples For free?
A: Yes. with on stock specification We provide samples For Free. Freight charge collect
Q: What information should i provide to source for the right products?
A: Material grade, width, thickness, coating and Purchase quantity, Expected lead time, etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed. We provide All Original Mill test certificate and support third party inspection.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.
