AM 350 Type 630 Stainless Steel Coil Strips ,Foil , Wire UNS S35000 overview
AM 350 Alloy brings together the strength of heat treatable martensitic grades with the corrosion resistance of
some of the chromium nickel austenitic grades.
AM 350 Alloy is a heat treatable austenitic or martensitic alloy, depending on heat treatment. It brings together the
strength of heat treatable martensitic grades with the corrosion resistance of some of the chromium nickel austenitic
grades. Generally used in applications under 1000 °F where a combination of strength and good corrosion resistance are required.
PRODUCT FORMS:
Coil , Sheet, plate , Strip .wire ,- Profile, Round, Flat, Square
XM-7, 304CU, 304HQ Coil, Wire, ASTM A493, 302HQ Products Specification and Dimension Ranges
Specififcation:
Strip, Coil, Foil, Wire, AMS 5548, ASTM A693, MILS 8840, (Type 633)
- AMS 5546
- AMS 5548
- AMS 5554
- ASTM A579
- ASTM A693
- MIL S-8840
- AMS 5745
- AMS 5774
- AMS 5775
- SAE J467 (AM-350)
Dimension Ranges:
| Width | Thickness | Inner Diameter | Steel Grade | Surface Finish |
| 610~2030 mm | 0.15~3.0 mm | 610 or 508 +0/-5 mm | 201; 254 SMO; 301; 301 AL; 301Si; 302; 303; 303 SE; 304; 304 L; 304 LV; 304 V; 3049; 305;30512; 308; 309; 309 S; 309 SCB; 310; 310 S; 316; 316 L; 316 LN; 316 Ti; 317; 317 L; 321; 330; 347; 384; 405; 409; 410; 410 S; 414;416; 416 SE; 420; 420 A; 420 HC; 420 LC; 420 MO; 430; 430Li; 434; 436; 439; 440 A; 440 C; 441; 442; 444; 446; 18 SR1;Carpenter 20,CB32; Carpenter 4552; Custom 450; 18-9LW1; 19-90L4; Greek Ascology;; AL-6XN4; 904L; Duplex 2205; Duplex 2304; Duplex 2507,Nickel alloys , Titanium and Ti alloys | 2B, 2D, BA, No.3, No.4, No.5, SB, HL |
| 610~2030 mm | 2.5mm~10 mm | 610 or 508 +0/-5 mm | | No.1 or As requied |
Coil Slitting Mill Capability :
Striping processing, commonly known as “slitting “, refers to the winding of a metal coil by unwinding, slitting,
leveling, winding, and processing into a desired width. Slitting processing is a basic metal processing technology
that combines high-quality equipment with skilled craftsmanship. it can be obtained with strict tolerance, perfect
surface control , safe packaging as well as fine transportation.
- Max thickness: 18 mm
- Min thickness: 0.1 mm
- Max width: 2150 mm
- Min width: 8 mm
- Width tolerance: 0 – 0.1 mm
- Burr: T<1mm: ≤0.05mm; T≥1mm: ≤5%T
AM 350 Type 630 Stainless Steel Coil Strips ,Foil , Wire UNS S35000 Application
Bellows, industrial cutters, knives and a variety of vales and gas turbine componet
AM 350 Type 630 Stainless Steel Coil Strips ,Foil , Wire UNS S35000 Technical datasheet
Grade 350 stainless steel alloy is a heat treatable austenitic/martensitic alloy. The following
datasheet gives an overview of grade 350 stainless steel alloy.
Chemical Composition
The following table shows the chemical composition of grade 350 stainless steel alloy.
| Element | Content (%) |
| Iron, Fe | 72.69 - 76.29 |
| Chromium, Cr | 16-17 |
| Nickel, Ni | 4 - 5 |
| Molybdenum, Mo | 2.5-3.25 |
| Manganese, Mn | 0.5-1.25 |
| Silicon, Si | 0.5 |
| Nitrogen, N | 0.07-0.13 |
| Carbon, C | 0.07-0.11 |
| Phosphorus, P | 0.04 |
| Sulfur, S | 0.03 |
Physical Properties
The physical properties of grade 350 stainless steel alloy are highlighted in the following table.
| Properties | Metric | Imperial |
| Density | 7.7-8.03 cm3 | 0.278-0.290 lb/in3 |
Mechanical Properties
The following table outlines the mechanical properties of grade 350 stainless steel alloy.
| Properties | Metric | Imperial |
| Tensile strength | 1105 MPa | 160266 psi |
| Yield strength | 415 MPa | 60190 psi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation | 30% | 30% |
| Hardness | 95 | 95 |
Thermal Properties
The thermal properties of grade 350 stainless steel alloy are displayed in the following table.
| Properties | Metric | Imperial |
| Thermal expansion co-efficient (@ 20-100°C/70-212°F) | 11.3 µm/m°C | 6.55 µin/in°F |
| Thermal conductivity (@ 38°C/100°F) | 14.5 W/mK | 100.7 BTU in/hr.ft².°F
|
AM 350 Type 630 Stainless Steel Coil Strips ,Foil , Wire UNS S35000 Products display and Package Details
Packaging (details)
1. Pallets with several coils
1.1 Coils packed eye to sky on one-way pallet with spacers without pallet cover.
1.2 Coils packed eye to sky on one-way pallet with spacers and covered with shrink-wrap.
1.3 Coils packed eye to sky on one-way pallet with spacers and covered with paper hood.
1.4 Coils packed eye to sky on one-way pallet with spacers and covered with wooden box.
1.5 Coils packed eye to sky on pallet with spacers without cover.
1.6 Coils packed eye to sky on pallet with spacers and shrink wrap.
1.7 Coils packed eye to sky on pallet with spacers and paper hood.
2. Pallet with single coil
2.1 Coil packed eye to sky on one-way-pallet without cover.
2.2 Coil packed eye to sky on one-way-pallet with shrink wrap.
2.3 Coil packed eye to sky on one-way-pallet with paper hood.
2.4 Coil packed eye to sky on one-way-pallet with wooden box.
2.5 Coil packed eye to sky on pallet without cover.
2.6 Coil packed eye to sky on pallet with shrink wrap.
2.7 Coil packed eye to sky on pallet with paper hood.
3. Pallets with multistrip
3.1 Multistrip on one-way pallet.
4. Coils standing, unpacked
5. Pallets with spools, standing with horizontal axe
5.1 Wooden spool on one-way pallet standing with horizontal (eye to the wall) axe.
5.2 Cardboard spool (cardboard core and cardboard sheet) on one-way pallet standing (eye to the wall).
6. Cut lengths
6.1 Bundled.
6.2 On wooden boards.
6.3 In wooden boxes.
7. Special customer requests for packaging
7.1 Weight per packing unit.
7.2 Design and size of pallet.
7.3 Number and kind of coil tying.
7.4 Number and kind of interleaving spacer strips.
7.5 Corrosion protection.
7.6 Kind of wood and wood protection used.
7.7 Marking of material and packing.
FAQ
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
Q:What information should i provide to source for the right products ?
A: Material grade, width, thickness, coating and Purchase quantity , Expected lead time ,etc
Q:What are the shipping ports?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials.
Q:How long does your delivery time take?
A:In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q:Can I visit your location?
A:Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified
products will be destroyed.
Q:How to pack the products?
A:The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q:What is your working time?
A:In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.
