Wuxi Zhongxin Special Steel Co.，Ltd
High Quality. High Performance. Competitive Price.
Add to Cart
AS 1397 AZ70-AZ185 D Chromating Hot-Dip Aluzinc Steel Coil / Galvalume Steel / GL For Structural Sections
The galvalume coating is an alloy consisting of approximately 55% aluminum, 43.4% zinc and 1.5% silicon by weight, which is applied to steel by the continuous hot dip process. Galvalume steel sheet offers the best qualities of aluminum coated (aluminized) and zinc coated steel sheet (galvanized). The aluminum/zinc coating has barrier corrosion resistance and heat resistance similar to aluminum coated steel. It also has good bare edge galvanic protection and forming qualities similar to continuously annealed commercial quality galvanized. The appearance of Galvalume coating is quite distinctive. Its smooth, flat and fine spangle and a silvery metallic appearance make it attractive in unpainted applications.
| Standard | JIS / EN / ASTM Standard |
| Grades | SGLCC / SGL400 / SGL440 / SGL570 / SGLCD |
| ASTM A792M CS-A / CS-B / CS-C | |
| SS230 / SS255 / SS275 / SS340 / SS550 | |
| DX51D / DX52D / DX53D | |
| S220GD / S250GD / S280GD / S320GD / S350GD / S550GD | |
| Coating | AZ40-AZ150 |
| Spangle | Regular Spangle |
| Sizes | Thickness: 0.23mm - 6mm Width: 900mm-1250mm |
| Surface treatment | Chromate Treatment, Anti-fingerprint |
| Product Specification and Size : | |||||||||||||
| Hot-Dip 55% Al-Zn Coated Steel Coil (GL) | |||||||||||||
| JIS G 3321 2017 | ASTM A792M 2010 | AS 1397 2011 | EN10346 2015 | ||||||||||
| Specifications | SGLCD | SGLCC | SGLC400 | CS | DS | SS | G3 | G1 | G250 G300 G350 G450 G500 G550 | DX51D | DX52D | S220GD | S550GD |
| SGLCDD | 440 570 | Type | Grade | G2 | DX53D | S250GD | |||||||
| A | 230 | S280GD | |||||||||||
| B | 255 | S320GD | |||||||||||
| C | 275 | S350GD | |||||||||||
| FS | 340 | ||||||||||||
| 550 | |||||||||||||
| Thickness of Base Steel (mm) | SGLCC, SGLC340: 0.17~2.02mm; | CS Type A, B, C, Grade 230, 255: 0.17~2.02mm; | G1, G250: 0.17~2.02mm; | DX51D, S220GD, S250GD: 0.17~2.02mm; | |||||||||
| SGLCD1~3: 0.3~1.4mm; | FS Type A, B: 0.295~1.6mm; | G300: 0.28~1.5mm; | DX52D: 0.295~1.6mm; | ||||||||||
| SGLC400: 0.2~1.5mm; | DS: 0.3~1.4mm; | G350: 0.2~2.0mm; | DX53D, 54D: 0.3~1.4mm; | ||||||||||
| SGLC440: 0.2~2.0mm; | SS Grade 275: 0.22~1.5mm; | G450: 0.6~1.5mm; | S280GD: 0.22~1.5mm; | ||||||||||
| SGLC570: 0.17~2.0mm | SS Grade 340: 0.2~2.0mm; | G500, G550: 0.17~2.0mm | S320GD, S350GD: 0.2~2.0mm; | ||||||||||
| SS Grade 550: 0.17~2.0mm | S550GD: 0.17~2.0mm | ||||||||||||
| Coating Mass | AZ70~AZ185 | AZM100~AZM180 | AZ150 | AZ100~AZ185 | |||||||||
| Surface Finish | Regular Spangle | ||||||||||||
| Surface Treatment | Chromating, Oiled, Resin Coated (Anti-Fingerprint), or Green Treatment (Environmentally Friendly Anti-Fingerprint) | ||||||||||||
| Remarks | 1. Tolerance for thickness, width, flatness and so on conforms to individual product specification. | ||||||||||||
| 2. All products with thickness 2.0mm and under can be skin passed. | |||||||||||||
| 3. The coil inside diameter can be either 508mm or 610mm. The maximum coil outside diameter is 2000mm. | |||||||||||||
| 4. Please make inquiries to our Sales & Marketing Division for products with special specifications. | |||||||||||||
| 5. Coating mass beyond the specifications above can be provided by XZH Steel. upon mutual agreement | |||||||||||||
| Product Name | Base Type | Thickness (mm) | Width (mm) |
| Hot-dip 55% Al-Zn Coated Steel Coil | Cold-rolled Base | 0.16~2.00 | 700~1550 |
| Hot-dip 5% Al-Zn Coated Steel Coil | Cold-rolled Base | 0.20~2.30 | 700~1550 |
| Hot-rolled Base | 1.30~5.0 | 670~2000(trimmed)/ 2030(untrimmed) |
The table above shows the widest range of product dimensions. For a detailed acceptable order range, please contact Sales & Marketing Division.
For promptly and properly processing of your orders, please clearly specify the items as shown in the table
below. If you need to confirm any information about XZH STEEL . Feel free to contact us
| Required Ordering Data | Example | ||
| 1 | Specification (Name, Number, Grade) | JIS G3141 SPCC-SD GP R35 | |
| Temper | A, S,8,4,2,1 | ||
| Surface Roughness | R32, R35 Ra | ||
| Surface Finish | Bright Finish (B) Dull Finish (D) | ||
| Surface Quality | Unexposed (UE) General Purposes (GP) General Exposed (GE) Severe Exposed (SE) | ||
| 2 | Edge Type | Mill Edge | Cut Edge |
| Cut Edge | |||
| Mill Option (ME/CE) | |||
| 3 | Oiled Type | DOS-A | |
| 4 | Oil Weight | Medium Oiled | |
| 5 | Dimensions (Thickness x Width,coil) | 1.0mmx1219mmxCoil | |
| 6 | Inner Diameter | ID 610 | |
| 7 | Mass | Max. Mass | 10ton max. |
| Order Mass | 450 ton | ||
| 8 | Applications and Fabricating Methods | Steel drum | |
| 9 | Special Requirements (if Required) | Hardness : 55 HRB max. | |
Note: