Wuxi Zhongxin Special Steel Co.，Ltd
High Quality. High Performance. Competitive Price.
Add to Cart
305 is used for applications requiring a low rate of work hardening and typically undergoes severe cold forming during fabrication. The higher nickel content slows the work hardening and makes it ideal for eyelet and other deep draw applications. Gibbs can supply Type 305 Eyelet Quality in gauges from 0.15mm - 4mm in the deep draw annealed condition.
ASTM A493 305 stainless steel strip coil :
Equivalent Materials
JIS SUSXM15J1
UNS S30500
DIN 1.4314
AFNOR 9160/C 109
AFNOR 9160C411
AFNOR Z 12 CN 18-10
AISI 304
AISI 305
SAE 304
SAE 305
EN FE-PA 11
EN FE-PA 12
EN 1.4314
ASTM 304
UNS S30400
ASTM TP305
ASTM MT305
ASTM A240 for annealed condition
ASTM A666 for tempered material
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade:
2B, 2D, BA, No.3, No.4, No.5, SB, HL, etc
| Surface finish | Characteristics and application |
| NO.2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy compreh ensive uses. |
| NO.1 | The surface is finished by heat treatment and pickling or processes corresponding thereto after hot rolling. |
| NO.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria,but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL | Polished with abrasive belt of grit #150#320 on the NO.4 finish and has continuous streaks,mainly used as buildingsornaments elevators,door of building,frontal plate etc. |
| BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror,kitchen apparatus,ornament etc. |
| 8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
Condition :
ANNEALED CONDITION
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 38 KSI min (260 MPA min) Elongation: 40%min Hardness: B95 max
TEMPERED 1/16 HARD
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 45 KSI min (310 MPA min) Elongation: 40% min
Tempered 1/8 Hard Ultimate Tensile Strength: 100 KSI min (690 MPA min) Yield Strength (0.2% Offset): 55 KSI min (380 MPA min) Elongation: 45% min
TEMPERED 1/4 HARD
Ultimate Tensile Strength: 125 KSI min (860 MPA min) Yield Strength (0.2% Offset): 75 KSI min (515 MPA min) Elongation: 25% min
TEMPERED 1/2 HARD
Ultimate Tensile Strength: 150 KSI min (1035 MPA min) Yield Strength (0.2% Offset): 110 KSI min (760 MPA min) Elongation: 15% < 0.15" 18% > 0.15"
TEMPERED 3/4 HARD
Ultimate Tensile Strength: 175 KSI min (1205 MPA min) Yield Strength (0.2% Offset): 135 KSI min (930 MPA min) Elongation: 10% < 0.15" 12% > 0.15"
TEMPERED FULL HARD
Ultimate Tensile Strength: 185 KSI min (1275 MPA min) Yield Strength (0.2% Offset): 140 KSI min (965 MPA min) Elongation: 8% < 0.15" 9% > 0.15"
Available Steel Grade:
Stainless steel : Type 201, 202, 205, 301, 302, 302B, 303, 303Se, 304, 304L, 302HQ, 304N, 305, 308, 309, 309S, 310, 310S, 314, 316, 316L, 316F, 316N, 317, 317L, 317LMN, 321, 330, 347, 348, 384, 405, 409, 429, 430, 430F, 430FSe, 434, 436, 442, 446, 403, 410, 414, 416, 416Se, 420, 420F, 422, 431, 440A, 440B, 440C, 630 , 13-8 PH ,15-5 PH , 17-7 PH ,17-4 ph , 904L , A286 ,VG-10 , SAE 316 , SAE 316L , SAE 440 , SAE 420
Duplex stainless steel : 2205 , 2304 , 2507
Nickel alloy :
Titanium and titanium alloys
Type 305 is used for applications requiring a low rate of work hardening and typically undergoes severe cold forming during fabrication. The higher nickel content slows the work hardening and makes it ideal for eyelet and other deep draw applications. Gibbs can supply Type 305 Eyelet Quality in gauges from .005” -.025” in the deep draw annealed conditon.
| Chemical Composition | % | Thickness Tolerances < 6” AMS2242 | Tolerance (inch) | ||||
| Carbon | 0.12 max | over .050 - .062 incl | +/- .0030 | ||||
| Manganese | 2.00 max | over .035 - .050 incl | +/- .0025 | ||||
| Silicon | 1.00 max | over .029 - .035 incl | +/- .0020 | ||||
| Phosphorus | .040 max | over .020 - .029 incl | +/- .0020 | ||||
| Sulfur | .030 max | over .017 - .020 incl | +/- .0015 | ||||
| Chromium | 17.00 - 19.00 | over .013 - .017 incl | +/- .0015 | ||||
| Nickel | 10.00 - 13.00 | over .011 - .013 incl | +/- .0015 | ||||
| Molybdenum | .750 max | over .010 - .011 incl | +/- .0015 | ||||
| Copper | .750 max | under .010 | +/- 10% | ||||
|
Mechanical Properties ( AMS 5514) | |||||||
| Condition | Tensile Min PSI | Yield Min PSI | Elong % Min | Hardness | |||
| Annealed | 75,000 | 30,000 | Less than .025” – 45% .025” and over – 50% | 92 HRB max | |||
| Additional Information | ||
| Width Tolerance | +/- .003 | |
| Camber Tolerance | Up to and including 1.500” wide | .500” in 8 feet |
| Over 1.500” wide | .250” in 8 feet | |
| Edges available | #3 Slit edge | Mill edge |
| #5 Deburred edge | ||
| #1 Round edge | ||
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect