Wuxi Zhongxin Special Steel Co.，Ltd
High Quality. High Performance. Competitive Price.
Add to Cart
SSAB 600 Abrasion Resistant Plate / AR 600 Steel With 600 HBW Hardness For HOPPER And FEEDER
600 plate For wear resistant steel plate overviews
600 is renowned for being extra hard and durable for applications that cause extreme wear. Despite its hardness, it can nevertheless still be cut and welded, making it a highly favoured choice for a vast range of high-performance applications. However, it should be noted that unlike wear plates of lesser quality, 600 has been specially tailored for wear applications only.
Benefits of 600 include:
All these advantages combined result in a lower cost per service hour, making it the wear plate that makes sense for your project or workplace.
Wear plates are graded according to abrasion resistance (AR), with plates that have an AR score of 400 or 450 being more susceptible to wear than plates with a higher grading. If your plates are subject to sliding wear from very hard abrasives, you’ll enjoy a much longer wear life from 600 wear plates than from plates with a lesser grading
® 600 is available as plate in thicknesses of 6.0 – 65.0 mm and as sheet in thicknesses of 3.0 - 5.0 mm.
® 600 is available in widths up to 2000 mm and lengths up to 14630 mm.
For the plates :
Preferred dimensions 2000 x 4000 mm
For the sheets :
the preferred dimensions are
1250 x 3000
1500 x 3000 mm
Other dimensions on request.
More detailed information on dimensions is provided in the dimension program.
| Name | Thickness | Width | Length |
| 600 SHEET | 3MM-5MM | 600~2000mm | 600mm--14600mm |
| 600 plate | 6 mm~65mm | 600~2000mm | 600mm--14600mm |
| 600 Bar |
other specification and Dimension is available upon request
Waterjet cutting is a cost-effective process for producing prototypes and small batches for an almost unlimited range of materials. A DXF file of the workpiece to be cut is imported or created directly with the cutting software. Then the cutting qualities in the contour are determined. This determines the cutting parameters (feed speed or pressure). The material to be machined is positioned on the attachment and cutting can begin. Cutting with water jet is convincing because of particularly short programming and set-up times.
Our water jet cutting machine is designed for cutting large-format plates in high precision. The cutting system is equipped with Tilt-A-Jet, A-Jet cutting heads and dual bridge to increase cutting capacity and flexibility.
Flexible production with multi-functional cutting and drilling machine
Drilling, tapping and countersinking: MircoStep® DRM cutting systems can combine all of these methods in one single system, without affecting the quality of the components.
The advantages of such a combination of different methods is obvious: No time-consuming handling of components and no further tightening and any re- programming of the component at the cutting system – the entire process is completed using one cutting system.
For quick processing and tool change 8 – fold tool magazine is available, in which the tools are protected against cutting dust and damage. After drilling, the system automatically switches to the cutting tool, (plasma) and cuts all planned 3D contours.
Welding
Any conventional welding method can be used for welding these steels to any type of weldable steel.
We also perform hard facing of parts of machines and devices that are subject to higher wear. Hard facing is the process of applying the feed material to the base material or base. The purpose of hard facing is to restore the original dimensions or surface quality (due to wear), or change/improve the properties of the material's surface in order to protect it against corrosion, wear, high temperatures and cavitation, and obtain better sealing properties.
Download ® Welding Tech support Manual
Bending
is eminently well suited for cold bending.
Bending high strength steel sheet and plate rarely proves to be difficult, however, there are certain parameters that must be considered. A material of high purity with few inclusions is of fundamental importance, in order to achieve a good bending result. SSAB’s modern processing allows for high standards of surface quality, tolerances and mechanical properties.
Wear plates such as with high strengths can be cold worked by bending and roll bending. Due to the higher strength, however, factors must be applied to ensure that the bending and roll bending can be carried out with the best possible quality.
Rolling - To roll sheets and plates three rolls are used. We roll the sheets and plates of 400, 450 and 500 with thickness 1 to 60 mm and a width of 2-2.5 meters. Sheet and plate thicknesses up to 40 mm can be rolled without excess length. To roll thicker plates, excess length is required.
Download ® Bending instruction
Machining
can be machined with high speed steel or cemented carbide tools.
Xzh steel is one of the major suppliers , wholesaler , stockholder of products. Our skilled work force has many years’ experience of working with this material. Beside our inventory ,We have location just beside two major SSAB warehouse which
gurantee our quick delivery time .
We can offer customers a fast turnaround due to our extensive stock in all grades and thicknesses. We can offer expert advice to discuss your wearplate requirements and help in the design optimisation stage of the project.Due to our extensive manufacturing capabilities we can processor up to 700HB, press parts up to 14.6m in length and waterjet cut to avoid a Heat Affected Zone (HAZ).We maintain a full staff able to work with offer all types of fabrication using plate. Working to our customers’ exact specifications, we provide services that include oxy-fuel, plasma cutting, and water jet cutting ,thermal cutting ,welding ,machining ,bending for plates. We can press form or roll form to fabricate a Plate that is customized to your specifications.
600 has been successfully used as linings in applications such as conveyor systems, wear strips, feeders, chutes and concrete mixers and in other high-wear equipment. In the recycling industry, it has been used in rotating hammers and in shredder knivesTo obtain the best performance, attach your 600 wear part to a rigid support for limiting the flexing. Additional stresses from structural loads should also be kept at a low level.
Down-to-Earth Advantages for Quarrying and Mining
Quarry and open pit mine operations put high demands on equipment. When it comes to abrasion resistance, compromise can be costly. wear plate delivers unsurpassed advantages to the quarrying and mining sector throughout the entire production flow. This includes economic benefits that can make a significant difference in mining operations.
Recycling Components for Tough Demands
Recycling processes like the fragmentizing of waste places enormous demands on equipment. And if the materials involved, wear too quickly it can also mean enormous costs. To stay productive and competitive it is vital to use materials that stand up to the abuse. wear plate is the solution.
Breaking the Ground for Road Building places Tough Demands on Machines and Materials
A road building site is a perfect place for . Digging in the ground and transporting the material is typical wear situations. By using in wear parts and machinery around the site a lot of time can be saved through increased payloads, getting the road ready for transportation faster.
HYDRAULIC HAMMER
400/450 in the housing of the hydraulic hammer exposed to wear from rocks.
ASPHALT PLANT
450/500/550 as liner plates and in gravel chutes. 450/500 in the wings of the drum. 450/500 in the transport container from the drum to the truck delivery shaft.
EXCAVATOR BUCKET
450/500/550 in the excavator bucket. may be used in the entire bucket or just in the cutting edge and sides depending on the wear situation.
TIPPER BODY
450/500 in the body of the tippers and dumpers. is an outstanding wear fighter in these applications. also has great impact resistance, making it an excellent design solution.
BUCKET
450/500/550 in the entire bucket or cutting edge and sides depending on the wear situation.
BULLDOZER
450/500/550 in the blade of the bulldozer.
CHUTE
In the chute that leads into the crusher 500/550/600 is the obvious choice in this tough environment.
MOTOR GRADER
450/500/550 in the blades of the motor grader.
CRUSHER
500/550 used as liner plates in the interior in areas with high wear.
ASPHALT PAVER
450/500/550 in the screed plate
A: Yes . with on stock specification We provide samples For Free . Freight charge collect